Wellube completed line plugging on a 36ā150# crude oil line through inline tee to provide isolation during shut down to cold cut and replace the existing section of the pipeline.
62ā X 4ā Tee Enclosure Clamp Seals Leak with Zero Production Loss
Wellube successfully sealed a sea water leak in the Tee branch of a client pipeline using a 62ā x 4ā Tee enclosure.
Flare Line Leak Sealed Online with a 24ā Large Enclosure Clamp
Wellube successfully repaired a flare line with multiple sections of corrosion using a 2.9m long 24ā enclosure clamp, with zero interruption to production.
High Pressure Gas Leak Sealed Online with a 42ā Enclosure Clamp
Wellube successfully sealed a gas leak on a 42ā pipeline operating at 45 bar with a 42ā enclosure clamp and zero interruption to production.
Steam Leak on an Exchanger Flange Sealed with a 6-part 2m Ring Clamp
Wellube successfully sealed a steam leak on an exchanger with a 2-meter ring clamp with no interruption to production. Ā
Diamond Wire Saws used for Platform Decommissioning in KSA
Wellube supplied a range of Diamond Wire Saws (16ā to 30ā and 26ā to 60ā) along with experienced personnel to a major EPC company to complete platform decommissioning in KSA.
2ā Line Stopping Completed with Barrel Split Tee
Wellube successfully performed 2ā hot tap and line stop for an instrument line and nitrogen line to assist the client in repairing of the damaged line.
20ā Hot Tap Operation Performed on a Spiral Wound Chilled Water Pipe
Wellube completed a 20ā hot tap operation with a customised couple reinforcement solution on a 38ā chilled water line for a petroleum refinery in Egypt.
Chilled Water Line Isolated Using 16ā Single Position Pipe Freezing
Wellube team safely executed qty 2 off 16ā Single Position Pipe Freezing to isolate a chilled water line operating at a line temperature between 5.3 degree C to 10.3 degree C and at 5 bar pressure, for a prestigious client to perform their maintenance .activities.
On-line Sealing of Wellhead Master Valve Flange Leak
The clamp was successfully installed at the site and a Sealant Compound was injected into the flange cavity
